WARNING – To guard against injury, basic safety precautions should be
observed, including the following:
1.
INSTRUCTIONS
and all the important notices on the appliance before using. Failure to do so may
result in loss of fish life and/or damage to this appliance.
2. DANGER – To avoid possible electric shock, special care should be taken since
water is employed in the use of aquarium equipment. For each of the following
situations, do not attempt repairs yourself; return the appliance to an authorized
service facility for service or discard the appliance.
A. If the appliance shows any sign of abnormal water leakage, immediately unplug
it from the power source.
B. Carefully examine the appliance after installation. It should not be plugged in if
there is water on parts not intended to be wet. If the appliance or any part of it
falls into the water DO NOT reach for it. First unplug the unit before retrieving.
C. Do not operate any appliance if it has a damaged cord or plug, or if it is
malfunctioning or it is dropped or damaged in any manner. The power cord of
this appliance cannot be replaced; if the cord is damaged, the appliance should
be discarded. Never cut the cord.
D. To avoid the possibility of the
appliance plug or receptacle
getting wet, position the appliance
to one side of a wall mounted
receptacle to prevent water from
dripping onto the receptacle or
plug. A “drip loop” (see illustration)
should be arranged by the user for
the cord connecting appliance to a
receptacle. “The drip loop” is that
part of the cord below the level of
the receptacle or the connector
if an extension cord is used, to
prevent water from travelling along
the cord and coming in contact with the receptacle. If the plug or receptacle
does get wet, unplug the cord. Disconnect the fuse or circuit breaker DO NOT
that supplies power to the appliance. Then unplug and examine for presence of
water in receptacle.
3. This appliance is not intended for use by persons (including children) with
significantly impaired physical or mental capabilities, unless they have been
given supervision or instruction concerning the use of the appliance by a person
responsible for their safety. Children should always be supervised to ensure that
they do not play with the appliance.
4. To avoid injury, do not touch moving parts or hot parts
.
5. CAUTION - Always unplug or disconnect all appliances in the aquarium from
electricity supply before placing hands in water, before putting on or taking off parts
and while the equipment is being installed, maintained or handled. Never yank cord
to pull plug from outlet. Grasp the plug and pull to disconnect. Always unplug an
appliance from an outlet when not in use.
6. Do not install or store the appliance where it will be exposed to weather or
temperatures below freezing. FOR INDOOR HOUSEHOLD USE ONLY. DO NOT
IMMERSE.
7. Make sure the appliance is mounted correctly and securely positioned on the
aquarium before operating the appliance.
8. If an extension cord is necessary, a cord with proper rating should be used. A
cord rated for less amperes or watts than the appliance rating may overheat. Care
should be taken to arrange the cord so that it will not be tripped over or pulled. The
connection should be carried out by a qualified electrical installer.
9. Use only with AC adapter supplied with this product.
10. The socket-outlet shall be installed near the equipment and shall be easily
accessible.
11. LED power supply shall not be positioned on or into the cover frame.
12. “Z” attachments: The external flexible cable or cord of this luminaire cannot be
replaced; if cord is damaged the luminaire shall be destroyed.
13. This luminaire can be mounted on any aquarium with glass thickness of between
3mm and 15mm.
14. ATTENTION: The light source of this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire shall be replaced.
15. Do not stare at the operating light source. ATTENTION:
SAVE THESE INSTRUCTIONS
For the complete use and understanding of this product it is recommended that this
manual is thoroughly read and understood. Failure to do so may result in damage to
this product.
The Fluval Aquasky Bluetooth® LED combines super bright 3000-25000 K LEDs with tri-color RGB
LEDs to allow the user to adjust, via Bluetooth
® enabled smart device, the light spectrum in order
to replicate various environments; and create such effects as cloud cover, fading lunar, storm
and lightning.
